SpaceSaver | Sheet Racks | Conveyors | Rotator | Parts Tumbler
Photos | Quote Page | Home | Email
PHOTO GALLERY: CONVEYORS AND ORDERFILLING SYSTEMS.
Download Our
Brochures



Case Studies:
Electralloy
United Air Lines
Marmon Keystone
Precision Printing
Bull Moose Tube

Quote me:
Quotation Form

Contact Me:
Have your local Representative contact me

New Products:
CrankOut Sheet Rack
Beam Rotator

Single- Sided
SpaceSaver

Photo Galleries:
Racks
Conveyors & Orderfilling Systems
Pipe & Tube Systems


Get our catalogs

Powered Roller Conveyor handling
a large structural tube.

A heavy duty designed Powered Roller Conveyor feeding a 50" diameter stainless steel billet into a saw. This 12' bar weighs 40 tons requiring sturdy construction, a high - torque drive, and a delicate positioning control.

Transfer Conveyor for staging beams up to 60'long for sawing. Transfers provide continuous and sequential material flow to and from Roller Conveyors.

Overview of two sawing systems each comprising Powered Roller and Transfer Conveyors.

A Cross Conveyor for staging and discharge. This design features a series of arms with transports that carry the material. Cross Conveyors are practical for large accumulation areas and integrated process such as a beam fabrication line.

Outfeed Conveyor System equipped with a Powered Workstop Measuring System.

Infeed Roller Conveyor is served by two Transfer Conveyors on either side. One Transfer Conveyor is designated for staging stock for sawing and the other is for remnants to be returned to inventory.

A Powered Roller Conveyor Pivot Section creates a temporary aisle by raising 90 degrees. It raises and lowers hydraulically, and has live rollers.



Exit handling system serving a cut-to-length line (CTL). The CTL places a load of processed sheet onto a Transfer Conveyor where it is packaged. The packaged skids proceed to a Roller Conveyor for loading and conveying to the shipping area.

Powered Roller Conveyor Turntable Section to accomplish a 90 degree material flow change.

40' Long Transfer Conveyor with a "V" Cradle for bar stock order-filling and accumulating.

Pictured is a system for bars featuring a chain Hopper and Transfer Conveyor. The Hopper forms the bars into a dens bundle for banding and loads the bundle onto the Transfer Conveyor for accumulation.



Specially designed system for turned, ground and polished (TGP) bars featuring a Staging Magazine, Powered Roller Conveyor, Ejector, and Discharge Table. The Rollers are lined with heavy duty urethane and the Magazine, Table, and Ejector with nylon.




Steel Storage Systems, Inc.
6301 Dexter Street, Commerce City, Colorado 80022
USA 1-800-442-0291 - USA 1-303-287-0291 - FAX 1-303-287-0159
E-mail - info@steelstorage.com